EXPLANATION OF THE FEATURES
We offer combinations of fires and scenarios that are great for training. Choose the fire training you want to perform in the library.
Choose a single scenario, an extinguisher, and retry as many times as you like.
Individual scenarios
Run through a set of scenarios, choose the right extinguisher and get your test results at the end.
Test your skills
Complete a certification test by handling different scenarios and choosing the correct extinguisher. Pass the test and receive a certificate by email.
Certify skills
Train with randomly generated scenarios and extinguisher combinations to challenge your skills in different situations.
Randomized Training
This option gives you full freedom to create your own training setup. Combine scenarios, extinguishers, and training elements to build exercises tailored to your needs.
My combos
Bring fire scenarios into your real-world environment with mixed reality training for a more immersive and realistic experience.
Passthrough
Learn how to put out a lithium battery fire. These fires are difficult to extinguish as they often re-ignite. The white smoke is toxic and should not be inhaled. You will be given a fire extinguisher specially developed for lithium battery fires.
Lithium battery fire training
In this fire training you will be practicing putting out fires in a number of scenarios. You will be given the extinguishing agent that is optimal for the scenario you are in.
Simple training
Extinguishing agents
CO2
Foam
Dry powder
Water
Wet chemical
Lithium agent
Watermist
Fire Types
A-type fire
B-type fire
E-type fire
F-type fire
Lithium Battery Fire
Enviroments
Warehouse
Hotel
Office
Kitchen
Hospital
Train
Electrical room
Garage
Parking lot
Bus
Livingroom
Roofing Zone
Institutional Care
Forklift
Truck
Lithium Fire
Welding Zone
TRAINING PROGRAMS
Extinguishing agents, fire types and environments
Controller mode
If you don't want to use your physical fire extinguisher in the application, you can switch to controllers only. Change controller mode in the Bluetooth menu.
Put out the fire without the physical extinguisher:
1. Press the A button on the right controller to pull out the safety pin.
2. Press the grip button to discharge the extinguishing agent.
GET STARTED!
1. Download the VR Fire Trainer Application to your VR headset.
Download the application
Meta Quest
VIVE Focus 3
2. Log in to your account or create one.
3. Click to download the application.
Lost application?
If you have downloaded the application but accidentally removed it or performed a factory reset on your headset (which erased all data) you can always download it again. You will find the application under uninstalled applications in the VR headset library.
After a factory reset of your VR headset, we at Vobling need to reset your license key before you use it again. Contact us at support@vobling.com and we will help you!
Language
You can change the language in the VR Fire Trainer Application. The available languages are English, Swedish, German, Polish, Chinese (simplified), Finnish, French, Norwegian, Dutch, Romanian, Hungarian, Croatian, Serbian, Macedonian, Arabic, Spanish and Danish.
Teleportation
You can always move physically within your boundary space in the application in VR. If you have a limited play space you can turn on the teleportation movement (move using the controllers). Choose "enable teleportation" in the settings menu to activate teleportation.
To teleport with controllers:
1. Press the trigger button on the nozzle controller to bring out the teleportation pointer
2. Aim with the nozzle controller
3. Release the trigger button to teleport
APPLICATION
APP SETTINGS
Passthrough & Hand tracking
Required Headset Settings for the Application
Meta settings
To ensure the Vobling VR Fire Trainer works perfectly, please configure the following settings on your Meta headset before starting.
1. Enable Hand and Body Tracking
The application requires hand tracking to navigate the menus and paint fire nodes.
-
Go to Settings on your Meta headset.
-
Select Movement Tracking (or Tracking).
-
Ensure that Hand and Body Tracking is turned ON.
2. Room and Space Setup
You can manage your scanned rooms directly through the Meta system.
-
Go to Settings > Physical Space > Space Setup (or Environment Setup).
-
Here, you can see your previously scanned rooms or scan a new one.
-
Note: You can save up to 15 different scanned rooms in your headset.
3. Create a Custom Boundary
For the best and safest experience during the simulation, we highly recommend setting a custom boundary.
-
Choose the Boundary option in your headset settings.
-
Manually draw your own boundary covering the exact physical area you plan to move around in during the training.
​
​
Passthrough Step-by-step
1. Room Setup
-
Once you enter the Passthrough Scenario, a pop-up window will appear.
-
If your room has already been scanned, choose Continue.
-
If you want to scan the room again, choose Scan.
2. Paint the Fire Nodes
-
Now, you need to mark the areas that can catch fire.
-
Turn your left hand palm up to open the main menu. (You will use this menu throughout the session).
-
Press Paint on the menu.
-
Pinch your index finger and thumb together to start painting. Keep your fingers pinched and move your hand over the areas you want to mark.
-
Release your fingers to stop painting.
-
Tip: Fire nodes need to be close together or connected for the fire to spread properly.
-
Need to fix a mistake? Press Remove in the palm menu. Use the same pinching gesture over a node to erase it.
-
Once you are satisfied with your painted areas, press Continue.
3. Choose the Fire's Starting Point
-
Select where you want the fire to begin by pinching one of your painted fire nodes.
4. Adjust the Initial Fire Size
-
Look at your palm menu and adjust the slider . This controls how large the fire will be at the very beginning of the simulation.
5. Select the Fire Type
-
Choose the specific type of fire you want to practice with from the menu options.
6. Start and Extinguish!
-
The simulation will now begin. Grab your fire extinguisher and put out the fire!
Please note: Passthrough and Hand tracking features are currently only available on Meta Headsets
PASSTHROUGH SETUP
LICENSES & UPDATES
UPDATES
ISSUE WITH LICENSE
If you run into any issues or for some reason lose your VR headset and require a new license, just send us an email to support@vobling.com and we will help you!
We will continuously update and improve the application and we will send you updates remotely. When a software update is released you'll automatically see it in the library in the VR headset when you are connected to wi-fi. Click on the app icon to download it!